Quick Change SK100 Smooth Collet Pad
collet guys
$165.00
|
Diameter: 144.5 mm
|
Length 59 mm
|
Width 15 degrees
|
Clamp range 40-100 mm
|
Diameter: 144.5 mm or 4.507874 inches
Length: 59 mm or 2.32283 inches
Width: 15 mm or 0.590551 inches
Clamping Diameter: 40-100 mm or 1.578-3.093701 inches
Material: CR 15 cemented carbide
1, Rubber SK100 elastic collet pads unique in design and operation, the rubber elastic collets can generate two to three times the gripping force of a conventional split steel collets.
2, Gripping force is uniform and parallel throughout the collets contact length and not concentrated at the nose or back as it is a common issue of the split steel collets.
Advantages:
1, The rubber elastic collet's construction is of durable synthetic rubber compound permanently bonded to hardened steel jaws, it is unaffacted by heat, coolants and cutting chips and retains its flexibility over a long service life as compared to spring metal collets designs.
2, With a spring-type collet, unless the bore is exactly sized to the workpiece diameter there will be reduced contact, resulting in compromised accuracy and grip force.
3, With a rubber elastic collet, the segments always remain parallel to the workpiece,helping to maintain optimum accuracy and grip force.
4, Each collet segment is joined to the adjacent segments with vulcanized rubber.This ensures that the collet segments always remain parallel to the workpiece as the collet is compressed, and the gripping force is 3 times than the common spring split steel collet.
5, The one-piece construction ensures its flexibility and resists deterioration from heat, coolants and cutting chips.
6, All segments is cut from one piece collets, it has higher hardness and durability, so the gripping force and accuracy can't be matched by the spring split steel collets.
7, The rubber elastic collets can seal the workpiece and the machine spindle, so it can protect the workpiece from grinding material and cutting chips damage.
The rubber elastic collets steel hardness is HRC58-62, it is processed by cryogenic treatment.it can improve the collet's stability, the runout is less than 0.01mm, and the clamping range tolerance nominal diameter is +/- 0.5mm.
3 Month
